You are here: Home » Products » Granulation Machine » High Shear Granulator
Share to:

High Shear Granulator

The Hywell machinery High Shear Granulator, also called High shear granulation machine, rapid mixer granulator, Wet Granulation or High Shear Mixer Granulator, is an efficient and versatile blending machine for mixing of dry powders, or granulating with the addition of liquid binder, within a very short time and with excellent cleaning abilities. It is able to give perfect result for mixing due to the innovative design of a central impeller type mixer with a side vertical Chopper.the wet granulator machine is widely used in pharmaceutical, chemical, foodstuff and electronic industries.

  • GHL
  • HYWELL
  • 8479899990
  • SUS304/SUS316L/Titanium
  • Food/Pharmaceutical/Chemical
Availability:
Quantity:

High Shear Granulator Introduction

GHL Series high shear granulator(high shear mixer granulator)is equipped with a closed container with blending tools driven from above or below

Originally, the granulation liquid was poured into the product. Today, an improved dosed distribution using a spray nozzle is preferred in order to obtain a more even granulate.

The granules are distinguished by a compact structure and high bulk density. They have good flow characteristics and can be optimally pressed. For various applications in pharmaceuticals and related industries.

the GHL series high shear mixer granulator often connect with YK series swaying granulator Machine to get 1.5-5mm wet granules, and then direct to send the wet granules into the drying machine to get dried granules (instant granules), the drying machine can use Vertical Fluid Bed Dryer or Horizontal Fluid Bed Dryer, but it decide by the treating capacity. The final step of the process system is the granules sifter. The granules sifter will separate the large powder particles from the powder, size is determined for the separation. The off size is bagged off and the powder can be either directly packed into big bags or conveyed to a silo system for other packing systems.

Hywell Machinery have the laboratory granulator for the factory or experimental agency product development stage, please pay attention to hywell company's laboratory high shear granulator.


High Shear Granulation Description

Hywell Machinery high shear mixer granulator consist of two electrical motors, one reduction gear, coupling, and shafts with the two agitators. The shaft is sealed with special sealing, sometimes with air purge, in a way that there is limited contact between the material and the seal. Materials are loaded from top side, and the discharge is located at the bottom side. Due to the consistent modular design, the High speed granulation can be configured individually and easily adapted to the constructional circumstances and specific requirements.


Rapid Mixer Granulator Specifications

1Model

Total volume (L)

Operation Volume(L)

Impeller power (Kw)

Impeller speed (rpm)

Chopper power

(kw)

Chopper speed (rpm)

Weight

(Kg)

GHL-50

50

30

5.5

200-400

1.8

1500-2800

210

GHL-100

100

60

8

140-270

3

1500-2600

310

GHL-150

150

90

8

140-270

3

1500-2800

450

GHL-200

200

120

11

140-220

5.5

1500-2800

530

GHL-300

300

180

16

140-200

5.5

1500-2600

720

GHL-400

400

240

22

105-155

7.5

1500-2600

850

GHL-600

600

360

30

105-155

11

1500-2500

1150

1.Bigger size up to 1000L are available   against request

2.Hywell machinery reserves the right to the   design without notice

3.All specifications are as accurate as is   reasonably possible, but they are not binding.


High Shear Granulators Construction Material

Hywell Machinery are able to offer our GHL series high shear granulators with contact part to be built in SS304, SS316L, Titanium, Duplex stainless steel, etc. For the control system of GHL series wet granulators , Hywell have choices on push button, PLC+HMI and so on, and For the main electrical components of the high shear mixer granulation, it can  choices the famous brand that such as ABB , Siemens or Schneider or others.


How do the High Speed Mixing Granulator Works

Are you interested in how high shear mixer granulators works? The technology behind the high shear mixer is complex.

Regardless of the supplier, you are choosing, high shear mixing machine follow similar approach carrying out their granulation operation.

The working principle of Rapid Mixer Granulator follow the following processes;


Mixing of the powder

The high shear granulation process starts with the mixing of the powder in a bowl using the impeller.


Addition of binder liquid

Next, the impeller proceeds to mix and spread the granulation liquid also known as a binder at a speed between 5rpm – 300rpm.


Dampening or wetting of the powder

The High Shear Mixer Granulator ’s chopper breaks the wet lump to generate granules at a speed of 200 -3000rpm.


Nucleation process (formation of crystals powder)

At this stage, you will notice the formation of crystal powder otherwise called the nucleation process.


Granule growth and densification of powder

Agglomeration of granule or the power densification occurs next through the incorporation of granulation fluid into the powder using high-power-per-unit mass. This process is achieved through the rotation of the high shear forces.


Breakage and attrition of granule

The granulation process ends with the breakage and attrition of granules which is then transferred to wherever it is needed such as the fluid bed dryer whether for pharmaceutical purposes or other industrial uses.



Rapids Granulator Advantages

Hywell machinery GHL series rapids granulator had the following advantages over conventional solutions.

1. Excellent homogeneity of mixing with no dead points

2.    Complete discharge and easy cleaning

3.    Safety cage to prevent human injury

4.    Mixing in independent containers (Laboratory High Speed Mixers have this function)  offers no contamination and emissions, no extra cleaning.

5.    Time-saving, fast exchange of the container(on small models as an Option), due to simple and fast mounting of the container

6.   Highly polished inner and outer surfaces of the barrel, no dead comer, easy to discharge materials, easy to clear, no cross contamination. Confining to the requirement of GMP.

7. The super mixing granulator have the Low noise and good seal

8. The high mixer granulator have enclosed structure, without overflow of power dust

9. The super mixing granulators have smooth running, reliable performance, easy operation.

10. The super blending granulator have small cubage, easy to install, convenient to operate and maintain.

11. The time of mixing in dry is 2 minutes and the time of granulating is 1-4 minutes. Compared with the traditional process, 4-5 times of efficiency is raised;

12. In the same sealed container, dry mixing, humidity mixing and granulating can be finished, it is in conformity with the requirements of GMP;

13.  One- step accomplished in one equipment

14.  The interval between the bowl and impeller is controlled to be within 1mm

15.  Granulation process requires less bind

16.  Granulation is achieved within a short time

17.  Greater densification and production of less friable granules

18.  The granulator produces reproducible less friable granules with a uniform particle size distribution

19.  High shear mixer minimizes the exposure of drug dust to workers due to reduced process dust generation

20.  The granulation endpoint is predictable while using a high shear mixer

21.  Saving 25% of adhesives and drying time

22.  It can be equipped with cone mill or swing granulator

23. Connect with fluid bed dryer by vacuum conveying by vacuum conveying.

24. Automatic PLC control system, mixing, granulating and milling.


Rapid Mixer Granulator Options


1.  Impellers Design

Y-shaped rotor blade with special aerodynamic profile – this key element with the various product-optimized chopper designs are the result of many years of successful development.


2. Construction Material & Finish

We are able to offer our PDI Mixers with contact part to be built in SS304, S316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. Standard of internal and external finish can be adapted to the customer’s needs. For abrasive materials we offer hardened Stainless Steel as the contact part.


3. Feeding & Discharging

A variety of feeding & discharging methods can be selected by the customers.it can feed by vacuum feeder.


4. Drive System

Drive system of rapid mixer granulator machine by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.


5. Spray Nozzle

Liquid can be added into the powder by spray nozzles on the top.



Rapid Mixer Granulation Application:

The GHL series wet granulator machine is widely used in pharmaceutical, chemical, foodstuff and electronic industries.


1. High Shear Mixer Granulator for Food industry

Batters, Flavours, Instant meals, Spice and herb mixtures, Sugar based confectionery tablets.


2. High Shear Granulator for Chemical industry

Coloring of plastics, Master batches, Powder mixing with liquid addition, Powder paints


3.  High Shear Granulation for  Pharmaceutical industry

Granulate mixtures, Powder mixtures, Wet granulations


4.  High Shear Granulators for Cosmetics industry

Ceramic dental mixtures, Eye shadows, Face powders



High Shear Granulator Video





Why High Shear Mixers are important?

The advent of high shear mixer granulators also called rotor/stator mixers revolutionized mixing technology. Imparting vigorous radial and axial flow patterns and intense shear, Hywell machinery Rapid Mixer Granulators accomplish a variety of processing objectives including homogenization, emulsification, powder wet-out, and agglomeration.

Hywell machinery High Shear Inline Mixers are used throughout many industries, including the pharmaceutical, health product, food, cosmetics, and chemicals industries. For challenging applications, Hywell machinery also offers advanced rotor/stator configurations: Ultra-High Shear Mixers capable of producing very fine emulsions and dispersions.


Hywell Machinery uses innovative solid dosage production process for High-Speed Mixers granulator

High shear mixer is an innovative solid dosage production platform designed to achieve operational excellence in the pharmaceutical manufacturing Industry. Raw materials are converted into final dosage forms in development, pilot, clinical and production volumes using wet granulation in one continuous production line. Hywell Machinery high shear homogenizer, offer the outstanding advantages of efficiency and product uniformity achieved with shearing mixing.


Hywell Machinery offers Industry level Rapid Mixer Granulators

Hywell Machinery shear mixer includes GHL Series rapid mixer Granulators. A whole set of rotor/stator mixer includes loading system, impeller system, spray system, chopper system, wet granulation equipment system, control system, etc.

These high shear mixers’ have high-quality granulator choppers which are used to ensure an optimum granular structure. More Specifically, the GHL series Rapid Mixer Granulator or High Shear Mixer Granulator is equipped with a chopper with straight high shear mixer blades. The position of the chopper in the lower third of the working vessel results in its very high level of efficiency, even in the event of minimum filling volumes.


Rapid Mixer Granulators: Choppers, Impellers

Hywell shear mixer’s chopper has two modes of speeds: two speeds or variable speed. Main shaft and chopper shaft are designed with one-way flow air seal, flow rate, the pressure of air seal can be measured & controlled to prevent and detect powder or water from entering inside.

The all-important tool in the wet granulation is the bottom driven Z-Rotor (Impellers). The unique geometry of the Z-Rotor ensures maximum efficiency while minimizing the power required. Cutting edge measuring and manufacturing processes ensure that the gap between the rotor/stator and the bottom of the working bowl is kept to a minimum while maximizing product yield.

Hywell machinery’s Unique high shear mixer technology is combined with easy handling. Our high shear homogenizer is of very fine quality with affordable prices. So if f you want to start a wet granulation equipment business, please contact us for more details soon.


We offer free Customization & Consultancy services for Rapid Shear Granulation

Hywell machinery high shear granulation can be customized according to your requirements, We are a leading high shear mixer manufacturer, and always at your disposal for any information required regarding high shear or rapid mixer granulators. once you supply the detailed user requirement statement(URS), we can supply the equipment line drawings and suggestion for your factory layout, and we will also provide you technical support for free.


Rapid Granulator




How to control high shear granulation parameters?

Many companies do not control the geometry of the high shear granulation, but the laboratory High Shear Mixer Granulator equipment is preferably selected or designed to be similar to the device with the same geometry, i.e., the same aspect ratio.

Amplification between devices with similar geometric structures is equivalent to amplifying only the stirring impeller speed, which is much simpler. It is also essential to amplify the speed of the impeller.

The effect of the stirring impeller rotation speed on the particle size is primarily related to the composition characteristics of the formulation and the granulation mechanism of the process.

In some cases, increasing the speed of the impeller can increase the particle size. In some cases, increasing the speed of the impeller increases the breakage rate of the particles, resulting in a decrease in particles.

The most important thing is to consider the air intake assembly of the high shear mixer.

During the operation of many granulators, the internal particles appear twisted rope, and the powder bed moves in a circular shape in the granulating pot under the action of the air system.

If the stirring impeller rotation speed is too low, the inside of the granulating bowl will be in a bumping state, so that the surface movement of the powder bed layer is relatively slow, and only the bumping state caused by the stirring impeller rotation speed is obtained.

The twisted rope state is vital for the mixing of the powder in the granulating pot and the distribution of the liquid, and mainly affects the size of the mother nucleus. There have been some laws for the amplification of the stirring impeller speed. Some people advocate a constant linear velocity.

Some people suggest that the Froude number (the ratio of centrifugal force to gravity inside the high shear mixer) is constant. Others have suggested using a continuous shear force inside the granulator, and they recommend using the following formula when zooming in NDn Where N is the angular velocity of the impeller, D is the diameter of the paddle, and n is a constant (n is found to be equal to 0.85, although this value is likely to be prescription-system dependent).


Chopper speed of High Shear Granulators 

The role of the Rapid Mixing Granulator chopper is not very clear. Based on the nature of most of the mixtures, we found that it neither promotes the growth of the mass, increases the compactness of the mass, or breaks the particles.

Increasing the size of the high shear mixer granulators can reduce the frequency of interaction between the granules and the chopper. In this case, it is an excellent idea to fix the linear speed of the cutting blade during the enlargement process because the particles are similarly impacted.

However, if other variables in the amplification process cause the particles to increase, increasing the chopper speed can reduce the size of the particles.


How to add the binder and the flow rate for the high speed granulation

Some advanced particle research has been devoted to the development of a mother core state diagram that describes the nucleation process under a given granulation process. This map has two dimensionless parameters: the time the droplet enters the powder bed and the jet flow rate (which can be considered as the ratio of the liquid spraying rate to the tumbling speed of the bed surface particles).

The droplets enter the powder bed for a short period (i.e., droplets that quickly enter the powder bed) and low jet flow (i.e., the droplets can be sprayed well onto the powder surface), and their nucleation behavior is controlled by droplets. That is to say, many mother cores are formed by a single droplet, and the size range of the mother core is relatively narrow. Either the time of droplets entering the bed increases or the increase of the spray flow rate leads to over-wetting.

The liquid deposits on the surface of the powder bed to form a large mother nucleus. In this case, mechanical force is required to destroy it. Force destruction leads to a wide distribution of the size of the mother nucleus. The size distribution of the nucleus is the beginning of granulation. For many prescriptions, it is critical to forming a similar size nucleus through the granulator. If the amplification process is to achieve the state in which the mother core is controlled by the droplets, it is required that the droplet size during the amplification process is the same as the droplet size during the small test .

Also, the low discharge flow rate is necessary (formation of a single sheet) for the droplet mother core to be effective. The method of reducing the spray flow rate is to ensure that the spray width covers the effective surface of the bed. This is to reduce the volume flow rate of the adhesive and increase the tumbling speed of the powder during the process of wet granulation in a high shear blender.


Granulation time of the high speed granulator

It is difficult to determine the effect of the granulation time on the properties of the granules by different granulators. The mechanical distribution of the liquid binder in a sizeable granulating pot requires an enormous time. However, this is primarily related to the formulation and process parameters.

Anyway, there are so many factors control parameters, beyond what we have written above.

That is why you should review the technology behind D&R high shear mixer and manufacturing high shear mixer to know more about the high shear mixer.

Through theory and technical parameter specifications, I believe you have learned a lot about the high shear mixer, especially the reason for the difficulty in R&D high shear mixer to amplifying batch Rapid Mixer Granulator (RMG) .

Hywell machinery focus on research about wet granulation technology, special combines machinery, and process which are key components from importation to production.

Thus, Hywell machinery as a rapid mixer granulator manufacturer and supplier is well versed in the sales and supply of High Shear Mixer Granulator.

At Hywell machinery, we are committed to providing you quality products as we are concerned about building our brand.

As such, we appreciate the feedback from you, not only in the aspect of reviews on machinery you purchase from us alone but also in our entire work process. They help us improve in all phases of our operation; from customer service to aftersales maintenance.


Rapid Granulator Machine



Factors affecting the granulation process

Many factors can affect the granulation process of a high shear mixer granulation. If you are not quite familiar with how this homogenizer mixer works, you can find it difficult to know how to best make use of GHL super mixing granulator.

We have highlighted some of the factors you have to pay attention to if you want to maximize the productivity of your high mixer machine. They include;


Formulation variables

The type and amount of binders used as an inactive material during the granulation process will go a long way in affecting the entire granulation process.


Physical Properties of Ingredients

The physical properties of the materials to be granulated can play a huge role in affecting the granulation process. Physical properties such as size, hardness, and the nature of the materials should be considered.


Binder Materials

There are several binder materials and solutions that you can use. Some of the popular excipients or binder materials used for Fast Shear Mixer Granulator include starch paste, hydroxypropyl cellulose, hydroxypropyl methylcellulose, polypropylene pyrrolidone, etc.

Natural Binders: cellulose, acacia, alginic acid, tragacanth, and pregelatinized starch Sugars: Liquid glucose, sucrose

Synthetic and Semisynthetic Polymers: Ethyl Cellulose, Hydroxy Propyl Cellulose, Hydroxy Propyl Methyl Cellulose (HPMC), Methyl Cellulose, Polyvinyl Alcohols, Polyethylene Glycol (PEG), and Polyvinyl Pyrrolidone (PVP).


Process variables

These include all the variables that can affect the outcome of the granulation process. Listed below are some of these process variables;

1.     Chopper speed

2.     Designs of Granulator


Methods of adding a wet granulating solution

1.     Rate of granulating solution

2.     Speed of Impeller

3.     Granulator bowl loading factor


High Shear Granulator



How to choose the best High Speed Mixer Granulator ?

Like every other equipment, selecting the perfect Rapid Mixer Granulator for your company can be a lot challenging.

Often, you will encounter a lot of advertisements, and several companies boasting how their high shear mixer is nice.

Hywell machinery have helped you with what to look for before you spend your hard-earned money on mixing equipment that doesn’t offer you the actual value for money.

Read on as we expertly dissect the factors to consider.

Whether your business is located in United States, Columbia, Egypt, Indonesia, Malaysia, Russia or Vietnam and you need quality high shear mixer for sale in China, the first thing you should check is the reputation of the brand you are dealing with.

Are they reliable, flexible with reputable durability? Do they offer aftersales services? Is their warranty on their products and who can vouch for their integrity?

The reputation of high shear mixer manufacturers partnered with can go a long way in determining how reliable their product will be.

Online reviews can be manipulated, thus, ensure that you do your research very well so that you don’t end up buying overpriced inferior products.


Flexibility of high speed mixing granulator

Just like multitasking is a highly valuable skill in recruiting employees, so is flexibility in choosing a mixer machine.

You surely want a product that can be used across many fields such as pharmaceuticals to food, cosmetics, and other industrial application of high shear technology.

Also, you should put into consideration factors such as recipes, volume, and products — the better, the higher the level of flexibility, the better for your company.

Some of the features to consider in terms of flexibility include:

•      Scalability – turning out of consistently quality output irrespective of the volume of the production.

•      PLC Control – The whole process control by Programmable Logic Controller. The control system is a Siemens S7-200 or S7-300 smart series stored program control (PLC). It features an operator panel unit of 6 or 12 inch Siemens HMI panel available on your request (as an optional item).

You can also control the following; Loading-Mixing time, impeller speed, chopper speed, solution feeding speed, solution feeding period, granulation period, discharging control.

There are three levels of passwords to access the panel.

The interlocks and alarms are designed in the control sys and HMI showing-able. The specific page on HMI recording the historic alarms are designed.

Rapid Shear Mixer Granulator that allows you to predict and control the parameters such as the size of binder droplet and distribution of particles is best for you, and that exactly what we offer at Hywell machinery.


Versatility

Is your company often producing different varieties of products? If yes, then you should try to go for granulation equipment that offers versatility. the super Mixing equipment that will turn out the specific product that you need; whether it is western medicine granules, tablet granules, capsule filling granules for pharmaceutical or chemical industries. It is suitable for less sticky granules.


Differing Volume of high-shear granulation

sometimes you may want to produce in batches, semi-continuous or continuous production. You should focus on Rapid Mixer Granulator that ensures a seamless switch in variable volumes. This will particularly help in a situation where there is a higher demand in output without the capital to invest in new mixing equipment.


Pay attention to details of high shear granulation

In the industries where every ounce of input counts, having the homogenized mixer that gives you the perfect output is essential. In pharmaceutical mixing, you as a manufacturer of the drug should focus on how to maximize your production better and cut the cost of production as much as possible. Select a high shear mixer that allows you to save time without compromising the quality of products. Also, having a product that lowers the energy consumed is good as well as the one that optimizes how you use the ingredients.


Put safety first

Your preferred high shear mixer must offer the maximum protection to both operators and the output as well.


Operator Safety

As we are all aware that mechanical equipment is susceptible to faults that are liable to cause an accident, the Fast Shear Mixer Granulator you are buying must prioritize the safety of users. It must show a specific interest in the protection of users in case of a hazard. Such a homogenized mixer must be easy to control for safety measures.


Output Safety

Most mixing equipment will be used in the manufacturing of food and drug. As such, a very high level of safety is required. You should steer clear of any products that can tarnish your business image and brand reputation. Here are some of the factors you should look out for in your choice of Shear Mixer Granulator ;Effective CIP system (as an optional item).



Rapid granulator of Hywell Machinery

Now that you have identified all the factors to consider in choosing the right Rapid granulator, another question to ask is, which factory should you choose particularly when buying Rapid granulator from China.

Hywell Machinery high shear granulator are reputed to be highly effective and get the job done in the lowest amount of time possible.

Hywell Machinery granulator machine are fast, safe, and efficient in turning out fine particles of different sizes.

If you are a manufacturer of drugs, cosmetics, food, health products, chemical, or other productions that require the use of a wet mixing machine, then we can meets your needs succinctly.

All Hywell machinery pharmaceutical granulator has a perfect degree of homogenization which makes it suitable across all sectors such as pharmaceutical, health products, beauty products, and food.

Hywell machinery products are known to be precise and produce an unusually high rate of shears that homogenizes products to derive the desired level of output uniformity.

Hywell machinery high speed mixer granulator is specifically built to enhance efficiency and lower the cost of operation which in turn saves you time and money.

If you are looking for a high shear mixer for sale that allows you to achieve a turnout of highly homogenized and uniform particle size or granule, then you have no better alternative than Hywell machinery rapid mixing granulator.

You can anticipate a faster and consistent output in an uncharacteristically single pass compared to the others which take more time.

As a customer, you can be confident that products tick all the boxes when it comes to the factors to consider in choosing the rapid mixer granulator.



Why you should choose Hywell as your supplier of high shear blending granulator machine

Regardless of the information at your disposal, you will find it challenging to select a particular mixing granulator manufacturer that gives you the best value for money.

Hywell machinery as a market leader is one of the most reputable rapid mixer granulator manufacturers and suppliers in China. Highly-rated as one-stop smart pharmaceutical production expert with over 20 years’ of supplying drying, mixing and granulator products such as High Shear Granulator, Fluid Bed Dryer, Fluid Bed Granulator, Vibration Fluid Bed Dryer, Cone Mill, Vacuum Conveyor, Bin Blender, Powder Mixer, Vacuum Dryer and many more.

Also, Hywell machinery offers an expert solution to all pharmaceutical mixing equipment issues for individuals and organizations.

If you are looking for ahigh-shear granulation for sale or you need reliable tested and trusted granulator plants of pharmaceutical equipment especially high speed mixing granulator and other mixing machines, please contact Hywell machinery.

These are some of the reasons why you should choice Hywell Machinery as your preferred granulator supplier:


Vast Experience

Experience in the industry plays a crucial role in choosing a supplier for any product you want to buy. Hywell machinery has been in the business of quality high speed graulation in China for over 20 years experiences.

With high-skilled and experienced personnel, Hywell machinery has brought a strength to the granulator equipment manufacturing and supplying in China by offering expertise advice from lab production processes and sales of quality replaceable parts.


Incorporation of Innovative Technology

Also, Hywell has special kinds of dust-free solid dosage forms granulation lines (High Shear Mixer Granulator + Fluid bed dryer) for processes that require mind-blowing innovation technology for special applications.


Customized Designs

Sometimes, some processes require that you sketch a diagram of the equipment you need as the purposes are highly specific. we help you to actualize your equipment requirements by fabricating machines that suit your needs.


Seamless Documentation Process

Hywell machinery ensures that all documents related to the granulation equipment guarantee easier training, operation, and maintenance of the equipment throughout our equipment’s life term for an exigent industry like the pharmaceutical market.

We offer a complete set of cGMP documents including Qualifications (DQ, IQ, OQ, ), FAT, SAT, USER manual documentation and parts certificate.


Compliance with International Standard

Hywell machinery business sections operate under the strict International Quality Standard of operation. Our control regulation certificate called the “International Quality Certifications” is ISO,CE in case you want to check for confirmation.


Outstanding Customer Support

Hywell understand that our customers are the reasons for our existence. Thus, we prioritize giving you quality customer service. We ensure that all your requests are handled with top professionalism. Our sales representatives are courteous and pay full attention to the unique needs of our customers irrespective of the size of their request.


Aftersales Service

Hywell is lead of high shear granulation manufacturer and supplier. It is heart-breaking to be left stranded after spending your hard-earned money on expensive equipment only for the product supplier to turn a deaf ear to your request when you need them the most.

At Hywell machinery, we offer all our customers full aftersales support. If you need safe hands to handle all the challenges you experience after purchasing your pharmaceutical equipment, you are in the right place with Hywell.



super mixing granulator

Previous: 
Next: 

Product Category

Consult Your Hywell Machinery Expert

We help you avoid the pitfalls to deliver the quality and value your fo need, on-time and on-budget.

Products

Why Us

Case Show

Contact Us
   +86-13382828213
   0519-85786231
  Wugang Industrial Park ,Changzhou
© COPYRIGHT 2022 HYWELL MACHINERY ALL RIGHTS RESERVED.