You are here: Home » Products » Laboratory Machinery » Laboratory Granulator » Laboratory Oscillating Granulator
Share to:

Laboratory Oscillating Granulator

Whether it be a wet powder or a pack of dry block materials, the Laboratory Oscillating Granulator will develop the material into fine and consistent granules. The machine comes with an elastically adjustable wire screen mesh that is easy to assemble and disassemble. The main elements of the Laboratory granulation machine are composed of an enclosed steel plated body and a lubrication system that enables it to run smoothly without producing any unnecessary noise.
The Laboratory Oscillating Granulation is a popular granulating machine used for size reduction or forming the required granule sizes from moist powder material or for crushing dried block stock, sensitive powders, and granules in the pharmaceutical, chemical and food industries. swing granulation make the quality of granules better by facilitating their flowability and handling.

 

  • YK
  • HYWELL
  • 8479899990
  • SUS304/SUS316L/Titanium
  • Food/Pharmaceutical/Chemical
Availability:
Quantity:

Laboratory Oscillating Granulator Introduction

YK series laboratory swing granulators is usually the key equipment of instant granule production line. The laboratory pellet production line includes the following equipment: Laboratory high shear granulator, Laboratory oscillating granulators, Laboratory dryer (laboratory hot air oven, laboratory vacuum shelf dryer), Laboratory powder shifter. This laboratory production line can make dry powder into uniform and instant granules. If the customer wants to make the final pellets into a ball shape, the wet pellets will be sent to the QL pelletizer to obtain the wet pellets and dried by a dryer.

Hywell Machinery also has industrial oscillating granulator if high volume granulator are required.


Laboratory Oscillating Granulators Description

The Swing Oscillating Granulator has one rotor, which oscillates on a horizontal axis. There is one screen of your required mesh size mounted at the bottom of the rotor which can be removed and remounted easily; its tension is also adjustable. Product is loaded from the top through the infeed hopper, and material falls on the rotor blade. The particles are broken down by a set the oscillating rotors as it moves from side to side. The sharp edges on the rotor, the oscillating movement of the rotor, and subsequent pressure of the product against the screen allows the size reduction of the granular material to take place as the material gets pushed through the screen mesh. (multiple screens available of various mesh sizes).

The driving mechanism of lab swing granulator is totally enclosed in the machine body and its lubrication system improves the lifetime of the mechanical components. These granulators are constructed with quality stainless steel to meet the GMP standard. The YK Series laboratory machine are among the most affordable oscillating granulators in the laboratory.


Laboratory swing Granulator Specifications

Model

Roller size (mm)

Roller quantity

Power (KW)

Roller speed

(rpm)

Capacity

(kg/h)

Weight

(kg)

YK-60

60

1

0.37

±55

15-30

90

1.Hywell machinery reserves the right to   the design without notice

2.All specifications are as accurate as is   reasonably possible, but they are not binding.

Laboratory Screen Granulators Construction Material

Hywell Machinery are able to offer our laboratory YK series screen granulators with contact part to be built in SS304, SS316L, Titanium, Duplex stainless steel, etc.

How do the Laboratory Sway Granulators Works

Hywell machinery lab sway granulator is mainly composed of a hopper, a drum, a screen, etc. The rotating drum is installed under the hopper, and there are sealed end covers at the front and rear. The rotating drum can be removed and cleaned at any time, as long as the front adjusting screw and front cover are removed Remove the three screws from the front end cover, and then the roller can be taken out.

Hywell machinery YK series laboratory swing granulator uses mechanical transmission to make the cage drum rotor reciprocate to perform forced granulation or collision crushing of the material. The gap between the screen and the rotating cage is controlled and the granules are extruded. Its production capacity is as follows The moisture, type, viscosity and mesh of the material vary, and different particle sizes can be obtained by changing the aperture of different screens.



Laboratory Extruder Pelletizer Advantages

Hywell machinery YK series lab pelletizer extruder had the following advantages over conventional solutions.

1. Uniformly granulation & fewer fines of wet material and dry materials.

2. Easy to operate; move, clean, convenient

3. Smooth running, reliable performance, easy operation.

4. Low noise and good seal

5. Small cubage, easy to install, convenient to operate and maintain.



Laboratory Pelletizing Extruder Application

the YK series lab pelletizing extruder is widely used in pharmaceutical, chemical, foodstuff and electronic industries.


Previous: 
Next: 

Product Category

Consult Your Hywell Machinery Expert

We help you avoid the pitfalls to deliver the quality and value your fo need, on-time and on-budget.

Products

Why Us

Case Show

Contact Us
   +86-13382828213
   0519-85786231
  Wugang Industrial Park ,Changzhou
© COPYRIGHT 2022 HYWELL MACHINERY ALL RIGHTS RESERVED.